|
Step 6.
Mounting the camera |
 |
| You will need to know the distance from the base of your camera to the center of your camera's lens in millimeters. The formula is (B divided by 2) + A |
|
|
| Once you know the distance to the center
of your lens mount the upright arm in the appropriate place on the rotator
arm using the 2 - 3/4" bolts. The picture above shows the upright
arm being mounted for a camera that is 28mm to the lens center.
|
|
|
| The picture above shows the upright arm being mounted for a camera that is 52mm to the lens center. |
|
|
|
Tighten the bolts securely making sure that the arm is flush with the sides of the rotator arm. |
|
|
|
|
|
|
|
|
|
|
| Older models of the Panosaurus used 2 rubber washers and a metal washer between the metal arm and the upper horizontal arm however, all new model Panosaurus users will use only one rubber washer with the clamping knob. |
|
|
